Bedroom decoration Feng Shui taboo

2022-07-22
  • Detail

The bedroom is where we sleep and rest, and the bedroom is also where we spend the longest time of the day. The Feng Shui in the bedroom naturally has an important impact on us, so we also need to pay attention to the Feng Shui taboos in the bedroom; So in Feng Shui, what are the Feng Shui taboos in bedroom decoration? The following is the related articles compiled by Xiaobian. Let's have a look

bedroom decoration Feng Shui taboo I, bedrooms should not be dark</p>
<p>although the ancients said

second, the door should not be directly facing the bathroom

the function of the bathroom is responsible for excretion, cleaning and bathing, which is easy to produce filth and moisture, so being directly facing the door will affect the air in the bedroom and be harmful to human health. Curtain can be installed on the doors of bedrooms and toilets to block the direct flow of air field between the two magnetic fields. If the pattern allows, it is also helpful to strengthen the ventilation of the passage between the bedroom and the bathroom, and direct the foul gas in the toilet out of the door

third, the door and bed on the mirror

a mirror is generally set up in the bedroom. The reflection of the mirror is also a double-edged sword, which can block evil spirits or hurt people, so it is not allowed to treat the bed. Especially when people wake up from sleep, they are easily frightened by themselves reflected in the mirror or floor to ceiling windows when their consciousness is not very clear

IV. the head of the bed should not be left blank

people do not easily see overhead when lying flat, so the head of the bed should be against the wall to avoid exposure and reduce the sense of security. From the analysis of the layout of home feng shui, it is actually a taboo. After people enter the sleep state, their prevention ability is the worst. If there is an unlucky gas, they will be unconsciously injured

v. bed to wall knife

wall knife is common in the top floor or between the sides, especially in high-rise buildings, which is also one of the main structures of buildings. The initial impact on the human body is lack of sleep, dizziness and headache, but the cause cannot be found. Over time, it may become a brain lesion

VI. the head of the bed should not be pressed by the beam

there is an unlucky saying of "pressing the top by the beam" in Feng Shui. The beam is easy to feel heavy psychologically, and people sleeping under the beam will cause mental oppression. The way to avoid is to move the bed over a little to avoid the beam. If you can't avoid it because the area of the room is too small or for other reasons, you can cover the beam with the ceiling to reduce psychological pressure

VII. The landing doors and windows are too close to the bed

the window is unlucky if the head of the bed is too close. Feng Shui aside, in terms of environmental sanitation alone, the bedside should not be close to the window. On sunny days, the sunlight from the window will direct at the head of the bed, while on rainy days, wind and rain will penetrate through the window cracks, affecting sleep, not to mention the strong wind or thunder and lightning

h-shaped steel is a kind of economic section high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength weight ratio, which is named because its cross-section is the same as the English letter'H'. Because all parts of H-section steel are arranged at right angles, H-section steel has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, and has been widely used

◆ I-shaped steel, whether ordinary or light, is relatively high and narrow in section size, so the moment of inertia of the two main sleeves of the section is quite different. Therefore, it can only be directly used for members bending in the plane of its web or form lattice stress members. It is not suitable for axial compression members or members with bending perpendicular to the plane of the web, which makes it have great limitations in the scope of application

◆ H-shaped steel belongs to high-efficiency and economic cutting profile (other cold-formed thin-walled steel, profiled steel plate, etc.). Due to the reasonable cross-section shape, they can make the steel more efficient and improve the bearing capacity. Different from the ordinary I-shape, the flange of H-shaped steel is widened, and the inner and outer surfaces are usually parallel, so it is convenient to connect with other components with high-strength bolts. The size composition series is reasonable, and the models are complete, which is convenient for design and selection

◆ the flanges of H-shaped steel are of equal thickness, including rolled sections and combined sections composed of three plates welded. I-beams are all rolled sections. Due to poor production technology, there are

杭州男科医院

大连男科医院

广州男科医院

Copyright © 2011 JIN SHI